Your cart is currently empty!
Three-way switches are always used in pairs and allow you to control a light or receptacle from two different locations. These switches have no ON or OFF markings because the on and off positions will vary as the switches are used.
The three-way switch has three terminal screws. The hot wire from the power source connects to the darkest screw terminal marked "COM" for "common." The other two terminals are called "travelers" and are interchangeable. The switch also has a ground terminal.
The trick in replacing an old three-way switch is to mark the wire attached to the COM terminal before you remove the old switch. Since the other two are interchangeable, you can't get them wrong. If there is a white wire connected to a traveler terminal, it should be labeled with black tape to indicate it is hot.
▪Field selectable 3500k (warm/neutral white), 4000k (neutralwhite), and 5000k (cool white) color temperatures.*
▪Long-life LEDs provide 196,000 hours of operation with atleast 70% of initial lumen output (L70), and 60,000 hours with atleast 90% of initial lumen output (L90).**
▪LED chromaticity based on < 4-step ANSI quadrangles.
▪LED color maintenance < 0.002 chromaticity shift (Δu’v’) overthe initial 6,000 hours of operation.
▪SLS-4FT-5L-LKFS provides a range of 3,500 to 5,000 nominallumens.*
▪SLS-8FT-10L-LKFS provides a range of 7,000 to 10,000nominal lumens.*
▪Universal 120-277 AC voltage (50-60Hz) is standard.
▪0-10vdc dimming drivers are standard.
▪Power factor > 0.90.
▪Total harmonic distortion < 20%.
▪Color rendering index > 80.
▪Steel housing and PMMA lens.
▪Optional emergency drivers and occupancy sensors areavailable.
▪Easy installation in new construction or retrofit.
There are no reviews yet.